Setting Bass Boost Frequency on Car Amp
If you want to set bass boost frequency on a car amp for greater depth and quality of deep bass, adjust the frequency to somewhere around 40Hz. On the other hand, you can adjust it to around 50-60 HZ if you want additional gain in SPL, more bang, and a kick in your seat. These two configurations have been tested to optimize the sound of the car amplifier.
Table of Contents
- Setting Bass Boost Frequency on Car Amp
- Step 1: Try Two Different Frequency Combinations
- Step 2: Adjust the DB Level
- Video explanation
If you have a bass boost in your car’s amp, turn it up slowly to listen to what the bass drum sounds like when you turn it up. Applying a small amount of bass boost will significantly increase the kick. If you want to use the bass boost, be careful when setting bass boost frequency because this is where distortion is commonly created in a system.
So, how should you set bass boost frequency on a car amp to avoid this? You will only need this guide, there is no need for any tools or supplies to perform the activity.
Step 1: Try Two Different Frequency Combinations
Most car amplifiers have a bass booster frequency and DB level. Set bass boost frequency on car amp to somewhere around 40Hz greater depth and quality of deep bass. For additional gain in SPL, more bang, and a kick in your seat, set bass boost frequency to around 50-60 HZ. These two configurations have been tested to optimize the sound of the car amplifier.
Step 2: Adjust the DB Level
To avoid clipping and distortion, you must now tweak the DB level. So, put on a bassy song, adjust your equalizer configurations, and crank up the music to the maximum. Return to the amp and locate the bass booster DB level. Fine-tune this slightly higher and stop when you hear distortion or any other type of potential deterioration in the sound quality.
How does bass boost work?
Bass boost works by increasing the amplitude of certain low frequencies, typically between 40-100 Hz. This gives the impression of increased bass response.
What are the dangers of using too much bass boost?
Using too much bass boost can cause distortion, and in extreme cases, can damage your subwoofers or speakers. It can also cause your car’s electrical system to strain, leading to potential issues with the battery and alternator.
Should I use the bass boost setting on my head unit or amplifier?
Using the bass boost setting on your amplifier is generally better, as it is designed specifically to amplify low-frequency signals. Head unit bass boost can cause distortion, especially if it’s turned up too high.
What is the relationship between bass boost and gain?
The gain control determines how much power is sent to your subwoofers, while the bass boost control modifies the frequency response. The two settings work in conjunction with each other and should be adjusted in tandem.